PrimAtü 10 - Differential pressure transmitter
PrimAtü 10 differential pressure transducers are suitable for detecting over, negative and differential pressure variations of non-aggressive gases. The pressure transducer is typically used in the following applications:Heating, ventilation and air-conditioning technology, Clean room technology, Draft pressure technology, Fill level measurement, Filter technology, Flow measurement


VISA/MASTERCARD, PAYPAL,
ANTICIPATED REMITTANCE OR DIRECT
PAYMENT WITH DELIVERY AT OUR
WHAREHOUSE.
CUSTOMER SERVICE: +39.02.6659.5982
| SKU | Model | Description | Price | Quantity | Price for quantity | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 38726 | U-100mbar-1-2-1-1-1-50-1 | Measurement range: 0 - 100 mBAR |
148 EUR |
|
|||||||||||
| 38727 | U-150mbar-1-2-1-1-1-50-1 | Measurement range: 0 - 150 mBAR |
148 EUR |
|
|||||||||||
| 38728 | U-200mbar-1-2-1-1-1-50-1 | Measurement range: 0 - 200 mBAR |
148 EUR |
|
|||||||||||
| 38729 | U-250mbar-1-2-1-1-1-50-1 | Measurement range: 0 - 250 mBAR |
148 EUR |
|
|||||||||||
| 38730 | U-300mbar-1-2-1-1-1-50-1 | Measurement range: 0 - 300 mBAR |
148 EUR |
|
|||||||||||
| 41956 | U-500mbar-1-2-1-1-1-50-1 | Measurement range: 0 - 500 mBAR |
148 EUR |
|
Description
Pressure transducer PrimAtü 10 can detect and display differential, both positive and negative pressure variations to lowest pressures, depending on the selected measure-ment range. The pressure is measured by means of a pie-zoresistive silicon sensor, which converts the detected differential pressure into a pressure proportional output signal. As an output, one can optionally choose between a display for visual indication and a digital interface.
The transducer can either be operated with a 24 VDC/VAC or a 230VAC sup-ply voltage, depending on the model.It is possible to select the pressure unit between hPa, Pa, mbar, psi that is displayed and output via the interface. The pressure transducer can be adjusted using two buttons. A button is used to adjust the zero point, and another to adjust the amplitude.
APPLICATIONS
PrimAtü 10 differential pressure transducers are suitable for detecting over, negative and differential pressure variations of non-aggressive gases. The pressure transducer is typically used in the following applications:Heating, ventilation and air-conditioning technology, Clean room technology, Draft pressure technology, Fill level measurement, Filter technology, Flow measurement
TECHNICAL SPECIFICATIONS
Measurement principle: Piezoresistive Measurement system
Measured medium: Non-aggressive gasses
Medium-affected substances: Si, Al, Au, Cu, Ni, Pd, EP, PC, ABS
Measurement range: 0 ... 0,3 - 1000 hPa unidirectional / bidirectional
Overall accuracy: 1,0 % FS *0,5 % FS* optional 0,2 % FS* optional
Long-term stability: ≤ 0,5 % (FS/year)
Temperature drift: ≤ 0,03 % FS/K
Power supply: 24 VDC (± 10 %) | 24 VAC (± 20 %)230 VAC (± 10 %) optional
Output signal: 4-20 mA (3 wires)
Time constant: 50 - 4000 ms
Power consumption: 4,00 VA
Operating conditions: Temperature 10 °C - 50 °C, Humidity ≤ 85 % RH
Storage conditions: Temperature 10 °C - 70 °C, Humidity ≤ 85 % RH
Housing material: PC-ABS V0
Dimensions: 112 x 88 x 46 mm (W x H x D)
Weight: max. 280 g
Protection type: IP65
Pressure connections: Ø 6,6 x 10 mm
Installation: Screw fitting
more informations on the datasheet, in the "Documentation" section
Documentation
Accessories
| SKU | Model | Description | Price | Quantity | ||
|---|---|---|---|---|---|---|
|
|
18172
|
Differential Pressure Certificate Ref. UKAS/ACCREDIA |
UKAS/ACCREDIA Traceable Certificate for DIFFERENTIAL PRESSURE on 3-point check: low range, mid-scale, full scale. |
€35.00
|