G2 - Local indication stainless steel turbines

The GPI Stainless Steel Flowmeter line are used with ammonium, plating solutions, caustic and acidic cleaning agents, fuel products and other chemicals. The lithium battery powered electronic display G2 Stainless Steel flowmeters are calibrated to read in gallons and liters per minute with two totals in which case one is resettable and gives you a cumulative flow total. The G2 Stainless Steel flowmeters come in ½ in, ¾  in, 1 in, 1½ in, and 2 inch models. No outputs on the series here offered  

Read more

Payment methods available:



VISA/MASTERCARD, PAYPAL,
ANTICIPATED REMITTANCE OR DIRECT
PAYMENT WITH DELIVERY AT OUR
WHAREHOUSE.



CUSTOMER SERVICE: +39.02.6659.5982

SKU Model Description Price Quantity
24207 G2 - Local indication stainless steel turbines - G2-S05-I-09-LM-A

Stainless steel turbine with local indication
Rate: 3,8 - 37,9 l/min  (1-10 GPM)
Accuracy: +/- 1,5% of reading
Process connections: 1/2" BSP-F
Operating temperature: -18 / + 60° C
Recommended strainer size: 55 mesh
Max pressure: 102 bar
Wetted materials : 316 Stainless Steel Housing,Ceramic Bearings, Tungsten Carbide Shaft, PVDF Rotor, 316 Stainless Steel Rings

 559 EUR
24208 G2 - Local indication stainless steel turbines - G2-S07-I-09-LM-A

Stainless steel turbine with local indication
Rate: 7,6 - 75,7 l/min  (2-20 GPM)
Accuracy: +/- 1% of reading
Process connections: 3/4"  BSP -F
Operating temperature: -18 / + 60° C
Recommended strainer size: 55 mesh
Max pressure: 102 bar
Wetted materials : 316 Stainless Steel Housing,Ceramic Bearings, Tungsten Carbide Shaft, PVDF Rotor, 316 Stainless Steel Rings

 572 EUR
24209 G2 - Local indication stainless steel turbines - G2-S10-I-09-LM-A

Stainless steel turbine with local indication
Rate: 18,9 - 190 l/min  (5-50 GPM)
Accuracy: +/- 1% of reading
Process connections: 1"  BSP -F
Operating temperature: -18 / + 60° C
Recommended strainer size: 55 mesh
Max pressure: 102 bar
Wetted materials : 316 Stainless Steel Housing,Ceramic Bearings, Tungsten Carbide Shaft, PVDF Rotor, 316 Stainless Steel Rings

 592 EUR
24210 G2 - Local indication stainless steel turbines - G2-S15-I-09-LM-B

Stainless steel turbine with local indication
Rate: 38 - 380 l/min  (10-100 GPM)
Accuracy: +/- 0.75 % of reading
Process connections: 1-1/2"  BSP -F
Operating temperature: -18 / + 60° C
Recommended strainer size: 28 mesh
Max pressure: 102 bar
Wetted materials : 316 Stainless Steel Housing,Ceramic Bearings, Tungsten Carbide Shaft, PVDF Rotor, 316 Stainless Steel Rings

 782 EUR
24211 G2 - Local indication stainless steel turbines - G2-S20-I-09-LM-B

Stainless steel turbine with local indication
Rate: 76 - 760 l/min  (20-200 GPM)
Accuracy: +/- 0.75 % of reading
Process connections:  2"  BSP -F
Operating temperature: -18 - + 60° C
Recommended strainer size: 28 mesh
Max pressure: 102 bar
Wetted materials : 316 Stainless Steel Housing,Ceramic Bearings, Tungsten Carbide Shaft, PVDF Rotor, 316 Stainless Steel Rings

 1525 EUR

Description


CERTIFICATIONS: - ATEX    EX II 1 G Exia IIC T6 Ta=-40° C to 60° C; IP 65 - IECEX  Exia IIC T6  Ta= 60° C  Ga IP 65 - FM intrinsically safe for Class I,II,III, DIV. 1  All groups non incendive for Class I,II,III, Div. 2 , Groups A,B,C,D,F,G

Documentation

Similar products

G2 - Local indication stainless steel turbines

Used for measurements of ammonia, caustic soda, acids, cleaning solutions, and other liquids for industrial applications. Process connections from 1/2 "to 2". In the series proposed here no analog or impulsive output.

DUAL PULSE - Insertion turbine for water

Insertion meter with peek rotor with PFTE graphite bearings. Body entirely in AISI 316. The unique design of the rotor allows to extend the linear field of the meter from 0.3 to 10 m / sec.

DR.20B - In-line flow rate meters

Fluid: Water.
Output signal: 4-20 mA.
Pressure Max: 25 Bar.
Steel body.
1/2 '', 3/4" or 1" threaded process connections