High quality dew point switch that sends early-warning signal before dew point is reached which can be used to control condensation in critical environments.

This is achieved by a quick and accurate response in monitoring relative humidity in combination with temperature.

Status LED light indicates condensation warning as 90% threshold is reached, as well as potential electronic failure with the device.

The sturdy housing is well ventilated, coupled with a thermally conductive aluminum alloy contact surface contact making it suitable for a variety of applications.

This product is designed for mounting directly on a pipe with a flexible strap included, or to a directly to a flat surface via the screw mounting holes.

SPECIFICATIONS
General:
Supply Voltage: 24V DC/AC ±20%
Power Consumption: 10mA for 24VAC; 6mA for 24VDC
Operating Range: 0…+50°C / 32...+122°F ; 0...100%RH non-condensing
Enclosure Rating: IP40
Dust Protection: by special coating (permeable for water vapor) Enclosure Material: PC/ABS UL 94 V-0, UV resistant injection-molded
Mounting: surface, duct or strap
Connection: 5-pole spring connector, AWG 30—16 / 0.2—1.5mm²
Weight: ~ 60 g
Storage Temperature -20...+70 °C (-4...+158 °F)
Storage Humidity: 10...100% RH

SPECIFICATIONS CONT.
Switch-points:
RH > 90% ± 3%: Open on clamp DRY, Closed on clamp WET
RH < 90% ± 3%: Closed on clamp DRY, Open on clamp WET
Switching hysteresis: 5% RH
Output: potential-free relay with changeover contact
Switching voltage: 24V AC/DC
Switching current: max. 1A
Temp Response time: < 3 min
RH Response time: < 25 s
Status indication: LED, red
ON: NO CONDENSATION
FLASHING: CONDENSATION DANGER
OFF: POWER OFF / FAILURE
Accessories: 2 mounting screws, TPE strech tie-wrap
Approval: CE & RoHS compliant
Warranty: 5 year limited warranty