The SA1-RTD surface-mount RTDtemperature sensor mounts on flat or curved surfaces and provides Class A accuracy for critical temperature monitoring applications.
Based on a 2 x 2 x 0.8 mm thin-film platinum RTD and supplied in PFA-insulated 3- or 4-wire configurations (connectors optional),
it can be customized for use in a wide variety of applications.

The sensor can be easily applied using its self-adhesive backing, or permanently mounted using OMEGABOND® cements.
Use the SA1-RTD to monitor chip, heat sink, and environmental temperatures in electronic devices;
check piping or ducting temperatures; monitor motor and transformer core

Specifications
Minimum/Maximum Temperature: -73°C to 260°C (-100°F to 500°F) continuous, 290°C (554°F) short-term
(when cemented in place)
Sensing Element: 100 Ω at 0°C (32°F), temp coefficient of 0.00385 Ω/Ω/°C (IEC60751)
Accuracy:±0.06Ω at 0°C (DIN Class A)
Stability: Less than 0.2°C drift/year
Response Time: Less than 0.9 s (63% response time in water immersion), less than 2 s response time on a hot plate
Self-Heating Effect: 2.5 mW/°C
Lead Wire: 1 m (40"), 26 AWG stranded nickel-plated copper, PFA-insulated and jacketed cable heat; test insulation capabilities; and check otherapplications in which surface and/or gradient temperatures need to be monitored or controlled.