SPECIFICATIONS
Input: 4-20 mA
Output: see products
Air consumption: 3.0 scfh (0,11 m3/hr) at mid range
Supply pressure: 100 PSIG (7,0 bar) maximum (Note supply pressure must be a minimum of 5 PSIG above maximum output)
Flow capacity: 4,5 SCFM (7,6 M3/HR) at 25 PSIG (1,7 bar) supply. 12 SCFM (20,0 m3/hr) at 100 PSIG (7,0 bar) supply.
Temperature limit: operating -40 to 160°F (-40 to 71°C). Storage -40 to 200°F (-40 to 93°C).
Loop load, I/P transducer: 7,5 Vdc@20mA.
Impedance: 260 Ohms @ 70°F.
Operating modes: direct, reverse or split range.

PERFORMANCE SPECIFICATIONS:

Accuracy, Hysteresis and repeatability: ±0,1% of span.
Deadband: 0,02% of span.
Position effect: Not noticeable effect.
Vibration effect: Less than ±1% of span under the following conditions: 5-15 Hz@0,8 in, constant displacement; 15-500 Hz @10 g's.
Supply pressure effect: Not noticeable effect.
Temperature effect: ±0,045%°F (0,07% °C) of span.
Reverse polarity effect: No damage from reversal of normal supply current (4-20 mA) or from misapplication of up to 60 mA.
PHYSICAL SPECIFICATIONS:
Port size: 1/4" NPT.
Media: clean dry, oil free, air filtered to 40 micron.
Materials: Housing Chromate-treated aluminium with epoxy baked paint NEMA 4X (IP 65).
Elastomers: Buna-N.
Trim: stainless steel; Brass; Zinc plated steel.
Weight: 1,8 lbs (0,82 kg).
HAZARDOUS AREA CLASSIFICATION Factory Mutual (FM) & Canadian Standards Approval (CSA)
Explosion Proof Class I, Division 1 & 2, Groups B, C & D Enclosure Nema 4X (IP 65) Temp. Code T6 Ta = 70° C
Dust Ignition Proof Class II & III, Division 1, Groups E, F & G Enclosure Nema 4X(IP 65) Temp. Code T6 Ta = 70° C
Intrinsically Safe Class I, Division 1, Groups C & D Class II, Division 1, Groups E, F, & G Class III, Division 1, Fibers Enclosure Nema 4X(IP 65) Rated 4-20 mA, 30 VDC Max. Temp. Code T4 Ta = 70° C
Non-Incendive Class I, Division 2, Groups A, B, C & D Enclosure Nema 4X(IP 65) Temp. Code T4 Ta = 70° C
Suitable for Class II & III, Division 2, Groups F & G Enclosure Nema 4X(IP 65) Temp. Code T6 Ta = 70° C
Entity Parameters U: (Vmax) = 30 VDC Ci = 0 uF I: (Imax) = 125 mA Li = 0 m H Pi = .7 w
ATEX Approval FM06ATEX0018X II 2 G Ex d IIB + H2 T6 Ta = -20°C to +70°C FM06ATEX0027X II 1 G Ex ia IIB T4 Ta = -40°C to +70°C FM06ATEX0028X II 3 G Ex nA nL IIC T6 Ta = -40°C to +70°C
Entity Parameters Ui (Vmax) = 30 VDC Ci = 0 uF Ii (Imax) = 125 mA Li = 0 mH Pi = .7 W Max.