Pressure transducers for measurements of liquids or gases. Measurements of absolute and relative pressure. Ranges up to 400 bar Accuracy: ± 0.2% Hysteresis, repeatability: 0.05%
Ranges from 0.6 to 1000 bar. Output signal: 4 … .20 mA / 0 -10 V. Resistant: to pressure peaks; to shock and vibration. Degree of protection: IP 65
WHILE LAST SUPPLIED!!!
Differential pressure gauge with alarm for air and non-combustible gases. Switch type: each setpoint has 1 type C relay (SPDT). Set point adjustment using front knobs.
PT 100 Class A. Stainless steel probe, 6 mm diameter. DIN B head Sensor: Pt100 class A ± 0.15ºC @ 0ºC, 3 wires.
They can be used to monitor the temperature of air or water in air conditioning, air treatment or other systems. They are available in different versions, with thermistor probes (various types) or with PT100 or PT1000 resistance thermometers.
Transmitters in industrial execution for measurements of relative pressures, vacuum, measurements of absolute pressure, of liquids, gases and steam. ATEX Eexia execution. Accuracy ± 0.075% f.s. HART protocol.
Low cost turbine for general applications for measurements of non-viscous and clean liquids. Flow rate defined by the nozzle used. Entrance and exit positioned on the same side.
Low cost turbines for general applications for measurements of non-viscous and clean liquids. Flow rate defined by the nozzle used. Accuracy: +/- 2% Repeatability: +/- 0.25%
WEB SENSOR Input: 0 (4) -20 mA No. of channels: 2 Output: Ethernet