Pressure transducers for measurements of liquids or gases. Measurements of absolute and relative pressure. Ranges up to 400 bar Accuracy: ± 0.2% Hysteresis, repeatability: 0.05%
Ranges from 0.6 to 1000 bar. Output signal: 4 … .20 mA / 0 -10 V. Resistant: to pressure peaks; to shock and vibration. Degree of protection: IP 65
WHILE LAST SUPPLIED!!!
Differential pressure gauge with alarm for air and non-combustible gases. Switch type: each setpoint has 1 type C relay (SPDT). Set point adjustment using front knobs.
Low differential pressure switch for industrial use for air and non-combustible, compatible gases. Set point adjustment: screw type inside mounting spud. IP65 version now available!
Low differential pressure switch for industrial use for air and non-combustible, compatible gases. Switch Type: SPDT. Repeatability: ±3%.
Execution in IP 65 plastic case. Programmable linear or quadratic output. Output: 4 … 20 mA + HART protocol. Programmable via HART protocol and with front keys on the instrument.
PT 100 Class A. Stainless steel probe, 6 mm diameter. DIN B head Sensor: Pt100 class A ± 0.15ºC @ 0ºC, 3 wires.
Sensor: Pt100 class A ± 0.15ºC @ 0ºC, 3 wires. Diameter: 4 mm. Lenght of thread: see item details. Output: 3 free wires.
Bar stock valves. Manifold daThread/thread 180°. Packing PTFE.
Flexible and adaptable 2 contacts + 4-20 mA. Type: PNP transistor. Accuracy: ≤1.0% of span.
SMART industrial differential pressure transmitter. Output: 4-20 mA + HART. Programming of zero value, span, characteristics, damping, using front buttons on the display.
They can be used to monitor the temperature of air or water in air conditioning, air treatment or other systems. They are available in different versions, with thermistor probes (various types) or with PT100 or PT1000 resistance thermometers.
Transmitters in industrial execution for measurements of relative pressures, vacuum, measurements of absolute pressure, of liquids, gases and steam. ATEX Eexia execution. Accuracy ± 0.075% f.s. HART protocol.
Pressure transmitters – ATEX Eex ia, resistant to pressure peaks, shockproof and vibration-proof.
WHILE LAST SUPPLIED!!
Ideal for applications that require optimal performance and maximum stability. Flow: 25 m3 / hr at 6.8 BAR power supply and 1.4 BAR output. Sensitivity: 3.2 mm H2O.
A valid choice for all applications where a precise maintenance of the outlet pressure at high flow rates is required. Flow: up to 80 scfm (135.9 m3 / hr). Sensitivity: 3.2 mm H2O (1/8 “H2O).
Input: 4-20 mA. Outputs: 3-15 PSI / 3-27 PSI / 6-30 PSI Dead band: 0.1% of the span. Temperature limits: operating from -40 to 70°C.
Explosion proof, and intrinsic safety, ATEX, FM, CSA. Input: 4-20 mA. Dead band: 0.02% of the span. Temperature limits: operating from -40 to 71°C.
Volumetric gears with ideal gauges for oil, grease, liquids … Execution: IP 66 Outputs: frequency – 2 outputs selectable reed contact / Hall effect
Low cost turbine for general applications for measurements of non-viscous and clean liquids. Flow rate defined by the nozzle used. Entrance and exit positioned on the same side.
Low cost turbines for general applications for measurements of non-viscous and clean liquids. Flow rate defined by the nozzle used. Accuracy: +/- 2% Repeatability: +/- 0.25%
Ideal for water or other clear liquids. Clear indication of flow presence. UNIDIRECTIONAL. Competitive.
WEB SENSOR Input: 0 (4) -20 mA No. of channels: 2 Output: Ethernet