STR551- Pixsys® display 96×48
The STR551 universal indicator is designed for process acquisition and retransmission. The analogue input can be configured as a parameter for a wide range of temperature and process signals in mA and Volt. The monochrome OLED graphic display supports process trend visualizations with settable sampling time and bargraph representation with thresholds for level, flow and metering measurements. The linearization of the entrance is customizable up to a maximum of 16 points, useful on tanks with an irregular profile. Mathematical functions related to the process are also implemented, such as Totalizer and Sum. Connectivity is guaranteed by the RS485 standard with Modbus RTU / Slave protocol. For maximum flexibility of use it is also possible to choose between horizontal or vertical installation. A distinctive feature that characterizes the entire STR series is the innovative multilingual interface, with text menus that allow intuitive and fast navigation between parameters and display pages. You can choose between five languages and the completeness of the menus allows you to considerably limit the need for consultation of the technical documentation for the initial setting.
Container: 96×48 (Front) x 48 mm (1 / 8Din)
Power supply: 24..230V AC / DC ± 10% 50/60 Hz (galvanic isolation 2500V)
Consumption: 6 VA
Display: yellow monochrome OLED
Environmental conditions: Temperature 0-45 ° C, humidity 35..95 uR% (without condensation)
Material: Container: Polycarbonate V0
Weight: About 165 g
Protection: Front panel: IP54 (IP65 with seal), Container and terminal blocks: IP20
Quick configuration: Memory Card, LabSoftView software, Wireless RFID (NFC)
Wiring: With extraction terminal blocks and spring locking
1 Configurable analogue: Res. 16bit, selection between Thermocouples K, J, S, R, T, E, N, B (automatic compensation of the cold junction 0..50 ° C, precision @ 25 ° C ± 0.3% FS or ± 1 digit), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), Linear inputs 0 / 4..20mA (40000 points), 0..10V (54000 points), 0..60mV (16000 points), Potentiometers FS 6 / 150Kohm (50000 points), customizable linear input (max 16 broken)
Acquisition time: Programmable up to 4.1 mS (frequency from 4.12Hz up to 242Hz)
2 Digital: PNP, Run function, Hold, Alarm reset, Tare-Zero, / Reset peak Maximum / Minimum / Peak-Peak, Reset totalizer, Activate-Reset sum, Block Configuration / Setpoint
2 Relay: 2 Relay 2A – 250VAC resistive loads
2 Analogue: 1 output 0..10V (60000 points) – 1 output 0 / 4..20mA (60000 points)
1 Auxiliary: 24VDC – 30mA for sensor power supply
Serial communication: RS485 Modbus RTU – Slave (galvanically isolated from power supply / inputs / outputs)
Alarms regulation: ON – OFF with hysteresis
Alarm mode: Absolute / Threshold, Band with instantaneous / delayed / retentive action and digital input / Probe break / Serial activation
Function Sum: With digital or keyboard input, sum of different process measurements over time
Totalizer function: Instant process display and total measurement since last reset
Graphic function: Trend display with time base settable from 1sec to 3600sec total 4K word of memory
Analog retransmission: Retransmission of process / setpoint values on the analog outputs
Serial retransmission: Retransmission of process / setpoint / parameter values on RS485 serial
Latch-on function: Semi-automatic procedure for learning limits on linear inputs
Multilingual menu: English / Italian / German / French / Spanish
Display unit of measurement: Possibility to choose the unit of measurement of the process to be displayed.
Product available - for orders before 12.00, shipping the same day.
(In case of payment by bank transfer, shipment will be made upon payment received).
Product temporarily out of stock - average delivery time: 10-20 days.
1 Analog Input + 2 Relay + 1 Analogue 0..10V + 1 Analogue 0