Differential pressure gages for non-combustible dry air and gas. Accuracy ± 2% Temperature limits: from -6 to 60 ° C. Process connections: 1/8˝ female NPT
Differential pressure gauges for low fields, low ranges. Fluid: air Temperature limits: from -7 to 48.9 ° C. Accuracy: ± 5% f.s.
Selectable current or voltage. Range: 0-200 ppm. Sensor: Electrochemical field replaceable. Temperature limits: from -20 to 50 ° C. Accuracy: ± 2% FS
Accuracy ±1%. Six point calibration certificate is included. ————————————– AVAILABLE ONLY ON ORDER
Differential pressure gauge with alarm for air and non-combustible gases. Switch type: each setpoint has 1 type C relay (SPDT). Set point adjustment using front knobs.
Measurement% U.R, temperature, dew point, medium bulb. It stores up to 99 values, ideal for technicians who need to take measurements and analyze them at a later stage. Temperature range: – 28 to + 60 ° C
Economic differential pressure switch for air and compatible non-combustible gases. Adjustable by front knob. Available in 6 different fields from 20 Pa up to 4000 Pa.
Low differential pressure switch for industrial use for air and non-combustible, compatible gases. Set point adjustment: screw type inside mounting spud. IP65 version now available!
Low differential pressure switch for industrial use for air and non-combustible, compatible gases. Switch Type: SPDT. Repeatability: ±3%.
NEW SERIES FOR LOW RANGES 616KD-LR Series Differential Pressure Transmitters Output signal: 4 ÷ 20 mA or unit with selectable range 0-10 and 0-5 volts. HIGH PRECISION
Pressed column pressure gauge. Ideal for speed measurement and filter clogging monitoring. Suitable for pressure measurements above and below atmospheric pressure and for differential pressure.
Adjustable in the field, for liquids and gases for 1-1 / 2 “pipes. Available ATEX version Contact type: SPDT snap (exchange contact). Process connections: 1-1 / 2 “NPT-male.
Liquids for Dwyer gauges
Differential pressure transmitter ideal for monitoring air pressure and speed. Zero & span adjustment: digital via buttons. Output signals: 4-20 mA 0-10 Vcc
Versatile differential pressure transmitter: 4 SELECTABLE FIELDS Double output in current and voltage allow simultaneous use of the two outputs.
Differential pressure controller that contains three different functions in a single instrument. Output signal: 4-20 mA, 900 Ohm max Contact type: 2 RELAYS SPDT
Several fields available starting from 0-60 Pa min Zero and span digitally adjustable using buttons Version with or without display.
Differential pressure transmitter for air and non-combustible, compatible gases. Ranges up to 1 KPa Output signal: 4 ÷ 20 mA. Temperature limits: from -6.67 to 48.9 ° C.
The series 616KD differential pressure transmitters with One-Touch technology. With a single button, ZERO and SPAN are calibrated correctly. Output signal: 4 ÷ 20 mA or 0-10 V
Compact and low cost differential pressure transmitter. Quick and easy installation. Output: 4 ÷ 20 mA, 2 wires. Zero and Span adjustment: ± 1 mA, non-interactive.
Low flows. For AIR and WATER.
Accuracy ± 5% F.s. for VFA models, ± 3% for VFB. Average length of the scale 2″ on the VFA models, 4″ on the VFB models.
Channel / wall temperature / humidity transmitters. Humidity range: 0-100% u.r. Temperature range: from -40 to 60 ° C Accuracy PT 100: DIN Class B; +/- 0,3 ° C @ 0 ° C
For pipes from 2 to 5 “. Operating range: – 35.5 to + 115.5 ° C (-32 to 240 ° F) Sensor material: copper conductor Assembly: to bind to the pipe
Outdoor temperature sensors. Ideal for outdoor temperature monitoring. Removable internal terminal block. Working range: -40 ° C – 121 ° C Probe diameter: 5.97 mm
Contact type: SPDT Connection type: to terminal board Also ATEX version (ATEX II 2 G EEx d IIC T6) c
It measures air speed or volumetric flow quickly and accurately. Output signals: 4 -20 mA, 0 -5 VDC, 0 -10 VDC. Range: 1000, 2000, 3000, 4000 FPM (5, 10, 15, 20 m / s); selectable fields.
It allows an accurate measurement of speed 16 fields selectable in FPM or m / s AVAILABLE 641RM VERSION WITH REMOTE SENSOR. The optional red LED display allows local speed display.
Media and plates for pressure gauges and transmitters. – Mounting brackets – Complete kits – Pressure sockets
Roto-gear valve technology permits full open to close adjustment while maintaining fine flow control of the process media in one valve design. Service: Compatible gases and liquids. Valve: Delrin®;
Accuracy: 2% of full scale. 1″ female NPT back connections For WATER up to 75 l/min. Process connection: 1″ female NPT back connections. End connections optional.
They can be used to monitor the temperature of air or water in air conditioning, air treatment or other systems. They are available in different versions, with thermistor probes (various types) or with PT100 or PT1000 resistance thermometers.
Low cost, for air and compatible gases. Temperature limits: from -1 to 49 ° C. Process connections: 1/4 “NPT male. Accuracy: ± 1.0% f.s.
Accuracy ± 0.25% f.s NEMA 4X version. Temperature limits: from -18 to 55 ° C. Process connections: 1/4 “NPT male.
Accuracy ± 0.5% f.s NEMA 4X version. Temperature limits: from -18 to 55 ° C. Process connections: 1/4 “NPT male.
Supplied with the cage to prevent liquid leakage. Measure of speed, static pressure, losses, efficiency of fans and blowers. Measures clogging filters and pressure of gas supply burners, boilers etc.
Selectable engineering units, auto zero, hold and min / max function. It can be used to set, adjust pressures, check pressure switches, set pressure regulators and check pneumatic circuits.
Ideal for technicians in the air conditioning sector, for speed measurements with Pitot tubes. Measurements of pressure, flow rate and speed together with numerous other useful functions.
For 1/2 “to 2” pipes Fluids: gases or liquids compatible with wet parts. Temperature limits: from -20 to 105 ° C Switch type: SPDT snap switch standard.
Vane operated flow switch for the liquids compatible with wetted materials. Magnetic connection Suitable for piping: from 1 “to 4”. Process connection: 1 “NPT male. Temperature limit: -40 to 121 ° C
Field adjustable – leak proof body. For pipes from 1 to 6 “. SPDT exchange contact type snap. Pressure limits: 10 bar Temperature limits: 100 ° C
Ideal for determining the differential pressure and therefore the speed at the entrance of variable volume stations or fans, in air conditioning systems.
Single pitot tubes in stainless steel. They do not require calibration. Precision holes for static pressure. Long-lasting 304 stainless steel construction. Welds in silver for a perfect seal.
Designed for the measurement of the flow of dirty air or gas, with the presence of particulates as happens in drains or chimneys. High dirt resistance, compliant with EPA specifications, 40 CFR.
Measure air speed or volumetric flow and temperature. Backlight for low light environments. Aluminum case of the digital indicator. Up to 99 storable readings for subsequent analysis.
Measure air speed, volumetric flow, temperature and humidity.Up to 99 storable readings. Stainless steel probe with convenient knob and with insertion depth incisions on the probe from 0 to 20 cm.
Paddle flow switch for compatible liquids. Process connections: 1 “M-BSPT. Temperature limits: 230 ° F (110 ° C). Contact type: SPDT (contact in exchange). Enclosure: Die-cast aluminum alloy.