Operating temperature range: from 0 to 50 ° C. Humidity operating range: from 5 to 95% u.r. Analog output: 4-20 mA 2 wires. The outputs are programmable via software.

WEB SENSOR Barometric pressure ethernet transmitter with display. Protection: IP30 Range: from 600 to 1100 hPa. Accuracy: ± 1.3 hPa at 23 ° C.

WEB SENSOR Input: 0 (4) -20 mA No. of channels: 2 Output: Ethernet

Temperature recorder with printer for temperature monitoring during transport. Operating temperature range: -30 / + 65 ° C Suitable for installation in the cabin. Resolution: 0.1 ° C

WEB SENSORS Temperature and humidity ethernet transmitter. Versions with one or more external probes or with built-in sensor are available, with or without display.

WEB SENSORS The display allows simultaneous display of temperature and relative humidity.The Modbus protocol allows to read the measured values, to set the alarm.

Barometer with 4-20 mA output. INTERNAL / EXTERNAL USE. Max range: 600 to 1100h Pa Execution: IP 54 Operating temperature range: from -30 to 80 ° C.

Indoor barometer with 4-20 mA output. Max range: 600 to 1100 hPa. Operating temperature range: 0-50 ° C. Engineering units and programmable analogue output with software and optional cable.

Flanges, Ac/dc Adapter and cables for Comet sensors.

The outputs are set by the manufacturer to the maximum range (-30 to + 80 ° C, 0 to 100% RH). Free configuration program TSensor for transmitter adjustment is ready to be downloaded at any time.

If the set limits are exceeded, SMS and JSON messages can be sent via the GPRS data connection.
Temperature range: from -20 to +60 ° C
Temperature accuracy: ± 0.4 ° C

Communication with the sensor is done via a wireless WiFi network. The device allows sending measured values ​​to the online COMET Cloud (with the shortest interval of 5 minutes) or into COMET Database. The values ​​can be displayed on integrated web pages and provided to third party systems using the Modbus TCP, JSON and XML. The measured values ​​are displayed on the LCD display.

Datalogger is designed to record CO2 from built-in sensor. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.

The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.

Recorder includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.