WIS - World Industrial Store

The display, with its 9 mm high digits, was designed to be as large as possible and was made at a slight angle, so that the displayed pressure can be easily read from a distance. Proven and robust LED technology
has been used, with a 14-segment display employed so that alphanumeric messages are well represented. The buttons used to set the switch parameters have been maximised in their size and ergonomically arranged. Their tactile feedback supports, and thus enables, usage without
additional assistance.  The three keys ensure easy, intuitive menu navigation. This menu navigation is in accordance with the new VDMA Standard. This VDMA Standard Form for fluid sensors (24574-1, Part 1, pressure switch) has the aim of simplifying the use of pressure switches by standardising the menu navigation and display.

Flexible and adaptable

During commissioning the CPS 1000 can be adapted, flexibly, to the mounting conditions. Due to the dual rotatability of the housing through more than 300°, the display can be adjusted independently of the electrical  connection. The display, therefore, can always be aligned towards the operator while the M12 connection can always be aligned to suit the desired cable run. If the equipment is to be installed overhead, the display can also be turned electronically through 180°.

High Quality
During development, great importance was attached to providing a robust design and an appropriate choice of materials. For this reason, both the housing and the threaded connector for the electrical plug are made from
stainless steel. Overtightening or breaking the plug is thus almost impossible.

SPECIFICATIONS:

Pressure ranges /Over pressure /burst Pressure:  See models

MATERIALS:

Wetted parts  Process connections :  316L stainless steel
                           Pressure sensor: 316L stainless steel 
                           ( up to  0...10 bar 13-8 PH)
Case:         Lower body:  316 L stainless steel
                    Plastic Head: PC+ABS
                    Keyboard: TPE-E
                    Display disc:PC

Internal transmission fluid:  Synthetic Oil  ( only for pressure ranges
                                                     < 0.....10 bar and  0....25 bar ass.)
Power supply: 15.... 35 Vdc
Output signal and 
maximum (ohmic load)  :  4-20 mA, 3 wire ( ≤0,5 kOhm)
Setting time  (Analog signal ): 3 ms
Current consumption: max 100 mA

ALARMS:

2 adjustable set points
Type : transistor PNP
Function: normally open/normally closed; Hysteresis function freely 
                  adjustable
Contact rating: supply voltage -1V
Switching current: 250 mA
Response Time: ≤ 10 ms
Accuracy of alarm setting:  ≤ 0,5% of span

Insulation Voltage : 500 Vdc

DISPLAY:

Type: 14 segments - LED RED , 4 digits,  height 9 mm , electonically 180°
             rotatable
Accuracy: ≤ 1.0 ± 1 digit
Update: 1000, 500, 200, 100 ms ( adjustable)

Accuracy: ≤ 1.0 % of span
                     ( Including non-linearity, Hysteresis, zero point and fuss scale 
                     error ) (as per IEC 61298-2)
Medium temperature : - 20....+85° C ( -4...+ 185° F)
Ambient temperature:  -20....+80° C   ( -4....+176° F)
Rated Temperature range : 0......80° C (+32.....+176° F)
Relativa Humidity: < 90%
Shock resistance:  50 g according to  IEC 60068-2-27 (mechanical shock)
Vibration resistance: 10 g according IEC 60068-2-6 (vibration under
                                         resonance)
Conformity: CE and   ROHS