WIS - World Industrial Store

Description:

The SML-10.0 pressure transmitters contain only a small number of active components, such asthe sensor element, a signal processing ASIC and aU/I converter circuit. The transmitter works with protection circuits connection included withpressure peak damping, load-dump-protection andthey are EMV stability reverse voltage protected.

Calibration takes place electronically, so that the Pressure transmitters display a comparably small total error and are stable in the long term. The

hermetically welded thin film measuring cell Ensures a high degree of longterm resistance to leakage and stability. The ASIC is a programmable precision-CMOS-ASIC with EEPROM data storage and analogue signal path.
The special steel membrane is completely vacuum-tight, extremely burst-proof and can be used with all standard media in hydraulics, pneumatics,environmental technology, process technology, semi-conductor technology and automotive engineering, in as far as they arecompatible with special steel. This thereby covers use in standard applications in mobile hydraulics and in other areas ofapplication. The great exactness and the robust, compact structure guarantee a broad range of possible uses in industry. 

Measuring range from 0,6 to 1000  Bar

Output signal: 4...20 mA (2 wire)
                           0 - 10 V

Power supply: 12 -32 Vdc
Operating temperature: -40°C bis +105°C
Media temperature:  to +125°C

Resistant to pressure peaks

Shockproof and vibration-proof

Overload range:  2 times >350 bar; 1,5 times > 700 bar ;

                               1,2 times up to1000  bar
Insensitive to temperature shocks

Protective system: IP 65 according to DIN EN 60 529

Piezo resistive vacuum proof

Stainless Steel membrane no O-ring, no silicone oil
Poly-Si on SiO2 (thin film resistances)
 
Electrical connection: DIN 43650 BF C
Process connection : G 1/4 "

Linearity: +/- 0.5% F.S. (RT) standard,  1% for 0,6 bar
Total error:  (non-linearity+ Hystresis ,repeatability and temperature
                        influence):
                        +/- 1 % F.S.  (typical 0,7%)  in the range -20° C / +85° C
                        +/- 2,5% F.S. (typical 1,5%) in the range + 85 ° C / + 100° C
                        +/- 3% F.S. (typical 2%) in the range -40° C / - 20° C

Weight: 90 g

Description