WIS World Industrial Store

ST2

Flow computers for air/gas/steam

• Liquid, Gas, Steam and Heat Flow Equations
• Menu Selectable Hardware & Software Features
• Two Line LCD
• Isolated Pulse and Analog Outputs Standard
• RS-232 Port Standard
• Panel Mounting 
• Windows™ Setup Software


DESCRIPTION
The SUPERtrol II Flow Computer satisfies the instrument requirements for a variety of flowmeter types in liquid, gas, steam and heat applications. Multiple flow equations are available in a single instrument with many advanced features. The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is supported.  The versatility of the Flow Computer permits a wide measure of versatility within the instrument package. The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument. Consider the following illustrative examples.
The isolated analog output can be chosen to follow the volume flow, corrected volume flow, mass flow, temperature, pressure, or density by means of a menu selection. Most hardware features are assignable by this method.
The user can assign the standard RS-232 Serial Port for external data logging, transaction printing, or for connection to a modem for remote meter reading. A Service or Test mode is provided to assist the user during
start-up system check out by monitoring inputs and exercising outputs. The system setup can also be printed.

SPECIFICATIONS
Environmental operating temperature: from 0 to 50°C
Storage temperature: from -40 to 85°C
Humidity : 0-95% Non-condensing
Materials: UL, CSA, VDE approved
Display Type: 2 lines of 20 characters
Displays Types:Types: Backlit LCD
Character Size: 0.3" nominal
User selectable label descriptors and units of measure

Keypad:
Keypad Type: Membrane Keypad
Keypad Rating: Sealed to Nema 4
Number of keys: 16

Enclosure:
Panel mounting
Size: See Dimensions
Depth behind panel: 6.5" including mating connector

Power Input:
The factory equipped power option is internally fused. An internal line to line filter capacitor is provided for added transient suppression. MOV protection for surge transient is also supported.
Universal AC Power: 85 to 276 Vrms, 50/60 Hz
Power Cosumption
AC Power: 6.5 V/A

Flow Meter Types:
Linear: Vortex, Turbine, Positive Displacement, Magnetic and others
Square Law: Orifice, Venturi, Nozzle, V-Cone, Wedge, Averaging Pitot, Target and others flow Inputs analog Input.
Accuracy: 0.01% FS at 20° C

Ranges:
Voltage: 0-10 VDC, 0-5 VDC, 1-5 VDC
Current: 4-20 mA, 0-20 mA,
4-20 mA stacked, 0-20 mA stacked
Basic Measurement Resolution: 16 bit
Update Rate: 4 updates/sec
Automatic Fault detection: Signal over/under-range,
Current Loop Broken
Calibration: Operator assisted learn mode
Extended calibration: Learns Zero and Full Scale of each
range
Fault Protection:
Fast Transient: 500 V Protection (capacitive clamp)
Reverse Polarity: No ill effects
Over-Voltage Limit: 50 VDC Over voltage protection
Over-Current Protection: Internally current limited
protected to 24VDC

Pulse Inputs:
Number of Flow Inputs: one
Input Impedance: 10 k W nominal
Trigger Level: (menu selectable)
High Level Input
Logic On: 2.5 to 30 VDC
Logic Off: 0 to 2 VDC
Low Level Input (mag pickup)
Selectable sensitivity: 10 mV and 100 mV
Minimum Count Speed: 2 Hz (to maintain rate display)
Maximum Count Speed: Selectable: 0 to 50 kHz
Overvoltage Protection: 50 VDC

Temperature, Pressure, Density Inputs
The compensation inputs usage are menu selectable for temperature, temperature 2, pressure, density or not used.
Calibration: Operator assisted learn mode
Operation: Ratiometric
Accuracy: 0.01% FS at 20° C
Basic Measurement Resolution: 16 bit
Update Rate: 2 updates/sec minimum
Automatic Fault detection:
Signal Over-range/under-range
Current Loop Broken
RTD short
RTD open
Reverse Polarity: No ill effects
Over-Current Limit (current input)Internally limited to protect input to 24 VDC

Available Input Ranges

Current: 4-20 mA, 0-20 mA
Resistance: 100 Ohms DIN RTD
100 Ohm DIN RTD (DIN 43-760, BS 1904):
Three Wire Lead Compensation
Internal RTD linearization learns ice point resistance
1 mA Excitation current with reverse polarity protection
Temperature Resolution: 0.01 C
Stored Information (ROM)
Steam Tables (saturated & superheated),
Fluid Properties: Water, Air, Natural Gas or Generic

User Entered Stored Information (EEPROM / Nonvolatile RAM)
Transmitter Ranges, Signal Types
Fluid Properties (specific gravity, expansion factor, specific heat, viscosity, isentropic exponent, combustion heating value, Z factor)
Units Selections (English/Metric)
Language Translations (optional)

Excitation Voltage
24 VDC @ 100 mA (fault protected)

Relay Outputs

The relay outputs usage is menu assignable to (Individually for each relay) Hi/Lo Rate Alarm, Hi/Lo Temperature Alarm, Hi/Lo Pressure Alarm, Pulse Output (pulse options), Wet Steam or General purpose warning (security).

Number of relays: 2
Contact Style: Form C contacts
Contact Ratings: 240 V, 5 amp

Analog Outputs
The analog output usage is menu assignable to correspond to the Uncompensated Volume Rate, Corrected Volume Rate, Mass Rate, Temperature, Density, or Pressure.

Number of Outputs: 2
Type: Isolated Current Sourcing (shared common)
Available Ranges: 0-20 mA, 4-20 mA (menu selectable)
Resolution: 16 bit
Accuracy: 0.05% FS at 20 Degrees C
Update Rate: 5 updates/sec
Temperature Drift: Less than 200 ppm/C
Maximum Load: 1000 ohms
Compliance Effect: Less than .05% Span
60 Hz rejection: 40 dB minimum
EMI: No effect at 3 V/M
Calibration: Operator assisted Learn Mode
Averaging: User entry of DSP Averaging constant to
cause a smooth control action

Approvals: CE Approved, UL/CSA Pending Serial Communication
The serial port can be used for printing, datalogging,
modem connection and communication with a computer.
RS-232:
Device ID: 01-99
Baud Rates: 300, 600, 1200, 2400, 4800, 9600, 19200
Parity: None, Odd, Even
Handshaking: None, Software, Hardware
Print Setup: Configurable print list and formatting

Isolated Pulse output
The isolated pulse output is menu assignable to Uncompensated Volume Total, Compensated Volume Total, Heat Total or Mass Total.

Pulse Output Form (menu selectable):
Open Collector NPN or 24 VDC voltage pulse
Nominal On Voltage: 24 VDC
Maximum Sink Current: 25 mA
Maximum Source Current: 25 mA
Maximum Off Voltage: 30 VDC
Saturation Voltage: 0.4 VDC
Pulse Duration: User selectable
Pulse output buffer: 8 bit

Fault Protection
Reverse polarity:
Shunt Diodes
Over-current Protected
Over-voltage Protected

Real Time Clock
The Flow Computer is equipped with a non-volatile real time clock with display of time and date.

Format
24 hour format for time 
Day, Month, Year for date


Models in stock In Stock n/d Out of Stock

Disp. Code Description Price % Discount Net Price
in stock 3885
ST2L10P

Flow Computer ST2

965,00 € 0% 965,00 €
Selected:
 

* Price are VAT excluded.

in stock In Stock
n/d Out of Stock