WIS World Industrial Store

160

Stainless steel pitot tube

Constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
• No calibration needed.
• Precisely located, burr-free static pressure holes.
• Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage.
• Long lasting 304 stainless steel construction.
• Silver soldered connections for leak-proof operation.
• ASME design meets AMCA and ASHRAE specification.
• Coefficient of "1."
• 5/16" models rated to 1500°F.
• Extended static connection helps guide tip within recommended 15° of air flow direction.
• Inch graduations on sides of 160 series to quickly determine exact insertion depth.
• Dwyer® Air Velocity Calculator, direct reading flow charts and instructions included.
• Use 1/8" models in ducts as small as 4", 5/16" models in ducts 10" or larger.
• Optional mounting gland or split flange make permanent installation fast and simple.


Models in stock In Stock n/d Out of Stock

Disp. Code Description Price % Discount Net Price
in stock 1613
160-8

Dia.: 5/16". Insertion length: 8".

78,20 € 0% 78,20 €
Selected:
in stock 7655
160-12

Dia.: 5/16". Insertion length: 12".

80,50 € 0% 80,50 €
Selected:
in stock 2220
160-18

Dia.: 5/16". Insertion length: 18".

86,20 € 0% 86,20 €
Selected:
in stock 2662
160-24

Dia.: 5/16". Insertion length: 24".

89,70 € 0% 89,70 €
Selected:
in stock 3970
160-36

Dia.: 5/16". Insertion length: 36".

103,00 € 0% 103,00 €
Selected:
n/d 3969
160-48

Dia.: 5/16". Insertion length: 48".

124,00 € 0% 124,00 €
Selected:
n/d 2277
160-60

Dia.: 5/16". Insertion length: 60".

169,00 € 0% 169,00 €
Selected:
in stock 1614
A-156

Flange mounting plate with 1/2" female NPT (to be used with A-159).

20,00 € 0% 20,00 €
Selected:
in stock 1617
A-158

Split flange.

17,00 € 0% 17,00 €
Selected:
in stock 1674
A-159

Mounting gland with 1/2" male NPT (to be used with A-156 flange mounting plate).

32,00 € 0% 32,00 €
Selected:
 

* Price are VAT excluded.

in stock In Stock
n/d Out of Stock